Thermostat and hygrostat
SG.KTO011 (NC)
Review SG.KTO011 (NC) by control type, NO/NC or change-over logic, setting range, switching capacity, terminal count and DIN-rail space before sending a control-device quote request.
Match the contact logic to the load
Share the controlled load, NO/NC or change-over need, set range, switching current, terminal photo and DIN-rail space before quote.
Key specifications
Use these product details to compare models, then request the latest datasheet, drawing, certificate coverage and availability before ordering.
Product details
Request before ordering
SG.KTO011 (NC) model sheet and drawing references
Model inquiry sheet for preparing the request. Ask for current documents before order.
Model sheet
| Switching capacity | max switching capacity 25A AC; 10A available |
|---|---|
| IP / class | IP20 / class II |
| Operating range | -10C to +55C |
| Material | plastic according to UL94 V-0, light grey |
| Body size | 60x33x43mm |
| Mounting | clip for 35mm DIN rail, EN 60715 |
| Connection | 2-pole / terminal connection provided; technical table lists 4-pole terminal common family wording, max clamping torque 0.5Nm; rigid wire 2.5mm2; stranded wire with wire end ferrule 1.5mm2 |
| Related load | heater |
Drawing references
Use these drawing references to prepare the request; ask for the current wiring diagram and contact-load documents before ordering.
Before quotation
- Confirm controlled load, voltage, current and required NC contact logic before quotation.
- Request current wiring diagram and terminal specification before panel wiring.
- Confirm certificate scope before using compliance wording.
Best fit
- Use this path when cabinet temperature should switch a heater, fan, cooling load or signal circuit.
- Check contact logic before pairing the device with heater.
- For replacement, send the old label, terminal photo, setpoint range and controlled load before quotation.
Send with inquiry
SG.KTO011 (NC) control and wiring check
| Device type | mechanical thermostat |
|---|---|
| Primary control | temperature |
| Contact logic | normally closed contact closes below set temperature for heater control |
| Setting range | single adjustable temperature dial available, approx 0C-60C scale |
| Switch difference | 7K +/-4K |
| Reaction time | mechanical sensing note says approx 10 minutes per degree |
| Switching capacity | 25A AC, 10A available |
| Connection | 2-pole product drawing; table family wording mentions 4-pole terminal; max clamping torque 0.5Nm |
| Mounting | clip for 35mm DIN rail, EN 60715 |
| Size | 60x33x43mm |
| Protection | IP20 / class II |
| Operating temperature | -10C to +55C |
| Typical loads | heater |
Model details
| Product family | Thermostats & Hygrostats |
|---|---|
| Product type | thermostat |
| Power | max switching capacity 25A AC; 10A available |
| IP rating | IP20 / class II |
| Dimensions | 60x33x43mm |
| Mounting | clip for 35mm DIN rail, EN 60715 |
| Wiring | 2-pole / terminal connection provided; technical table lists 4-pole terminal common family wording, max clamping torque 0.5Nm; rigid wire 2.5mm2; stranded wire with wire end ferrule 1.5mm2 |
Quote details
If this is a replacement inquiry, include old label photos, front grille size, cutout size, voltage and required fit tolerance.
SG.KTO011 NC thermostat heater control request
Use this section to organize replacement details, quote requirements and document requests before contacting the supplier.
- Heater-control inquiries where a normally closed thermostat is needed to switch a cabinet heater below set temperature.
- Replacement requests where terminal count, wiring diagram and DIN rail mounting must be checked.
- OEM control-panel builds pairing heaters, fans and thermostat logic in one cabinet environment.
Replacement and RFQ inputs
These inputs help separate a fit-check, a new cabinet design, a distributor quote and a document request.
Details to ask before quote
- Confirm terminal count and wiring diagram for SG.KTO011.
- Request switching capacity and service-life required documents.
- Confirm certificate coverage before compliance wording.
What does NC mean for this inquiry?
NC is typically used for heater control, closing below set temperature; confirm the wiring diagram before use.
Can SG.KTO011 control a fan?
Fan control usually uses a normally open thermostat path; confirm the load and contact logic.
What is the safest RFQ wording?
State controlled device, current, voltage, set range and required contact logic instead of assuming the circuit.
Related model request pages
Compare nearby models in the same product family before sending drawings, labels or document requests.
SG.EFR012
Thermostats & Hygrostats product page for comparing voltage, size, airflow and quotation details.
SG.ZR011
Thermostats & Hygrostats product page for comparing voltage, size, airflow and quotation details.
SG.KTS011 (NO)
Thermostats & Hygrostats product page for comparing voltage, size, airflow and quotation details.
Documents to request before ordering
- Current model name and export status.
- Datasheet, dimension drawing, wiring or cutout drawing where relevant.
- Certificate coverage by model or approved series coverage.
- MOQ, sample availability, lead time and private-label limits.